如果您的丰田智能锁匙不能正常操作，是时候更换新的CR1632锂电池
If your Toyota Smart Key is not functioning, is likely the time to replace a new Lithium battery CR1632
更换遥控锂电池的步骤
If your Toyota Smart Key is not functioning, is likely the time to replace a new Lithium battery CR1632
更换遥控锂电池的步骤
Steps to change the Smart Key's Lithium Battery
步骤 1 / Step 1
按着智能遥控旁的按钮（箭头1），然后把小锁匙拉出来（箭头2）
Press the release button at the side of the smart key (Arrow 1), pull out the small key (Arrow 2)
按着智能遥控旁的按钮（箭头1），然后把小锁匙拉出来（箭头2）
Press the release button at the side of the smart key (Arrow 1), pull out the small key (Arrow 2)
步骤 2 / Step 2
用平头螺丝刀把遥控背壳轻轻撬开
Use a flat-bladed screwdriver to open the smart remote back cover
步骤 3 / Step 3
把旧的锂电池拿出来，换上新的，然后盖回遥控背壳
把旧的锂电池拿出来，换上新的，然后盖回遥控背壳
Take out the old Lithium battery and replace with a new one，close back the back cover
锂电池CR1632 / Lithium Battery CR1632
就酱，试一试您的智能锁匙
Thats it, test your smart key
图片仅提供客户辨别款式，商标权均属各大原厂所有。
我们并无侵占及侵权使用之用意，若有侵权请告知。
All pictures used on this blog are for reference only.
All pictures used on this blog are for reference only.
The blogger does not intend to infringe on anyone's copyright for text, photos or otherwise.
Anyone who feels that any item in these pages may have inadvertently breeched their copyright should advise us,
so that appropriate remedial action can be taken.
Anyone who feels that any item in these pages may have inadvertently breeched their copyright should advise us,
so that appropriate remedial action can be taken.
No comments:
Post a Comment